The Stiga Twinclip 55 S-R H BBC rear roller rotary lawn mower is powered by a 163cc Honda GXV160 OHV engine with Blade Brake Clutch (BBC), providing plenty of power to deal with the toughest of conditions and a heavy duty aluminium cone clutch transmission. The Blade Brake Clutch allows you to empty the grassbag without stopping the engine.
The chassis is a unique hybrid design with a galvanised, powder coated deep drawn pressed steel cutting chamber with a J section lip for increased stiffness, and the rigidity of a cast aluminium conveyor at the rear of the machine incorporating the lower handlebar mountings. The conveyor is the perfect shape to maximise air flow, which is further enhanced by fins moulded into the anti-scalp plate at the front of the mower.
The Twinclip 55 S-R H BBC rear roller rotary lawnmower boasts new cutting technology – a double layered blade with 4 cutting faces. The leading edge of the blade makes the initial cut; the second blade cuts an additional 19mm, the cuttings are cut and re-cut through the blades as they are blown into the large 80 litre collector, resulting in a noticeable increase in collecting performance of approximately 20%.
The cutting height is selected by a single lever on the chassis, with a choice of 8 positions ranging from 13 to 65mm that will produce a great finish on your lawn whatever the conditions. If the grass is longer, remove the collector and rear discharge or alternatively simply insert the mulching plug and drive in Multiclip mode.
Blade Brake Clutch
The lever which engages the BBC (Blade Brake Clutch) makes it possible to stop the blade whilst leaving the engine running which is useful when moving the machine in grassless areas, such as driveways, paths and gravel areas.
This lawnmower is equipped with 455 mm steel roller to create the striped effect.
Centralised adjustment of the cutting height
Thanks to the ergonomic lever located on the wheel, the cutting height can be quickly set to 8 positions, from 13 to 65 mm.